Shop

-PE WAX: lubrication for PE, PP, PVC and calcium carbonate masterbatch which can be blended with polyolefins to improve the heat stability and melt viscosity for many industrial applications.

-Oxidized PE WAX: The grades of OPW-361, OPW-370 and OPW-420 are as oxidized PE WAX could have the following main rules in Hot melt adhesive (HMA) and PVC processing.

1. Hot melt adhesive: in HMA, the crystallinity and the congealing point of mentioned grades could adjust and control the open and set times of the HMA by formulation and also influence the flexibility and elongation properties of HMA. the PE WAX oxidize in formula could highly optimize the increasement of blocking point of the final adhesive and also the prevention rule in adhesive pastilles sticking in the pack while transporting or storage. finally, the hot melt high temperature property could change by the quality and type of the used wax.
2. PVC compound processing and reprocessing: PE WAX has some important rules of excellent external lubricity and strong internal lubrication, both in producing of PVC soft and hard PVC products. the Hard PVC, the strength reduction and adverse effect on process operation are the limiting consumption factors. in other hand the peeling can occur in Injection parts of PVC, especially near the gate.  the normal consumption rate of PE WAX Oxidized is in the range of 0.5% to 1%.

Oxidized Polyethylene Wax has special properties such as low viscosity, high softening point and good hardness, non-toxic, good thermal stability, low volatility at high temperature, excellent dispersion of fillers and pigments, lubrication with strong internal lubricative effect. It also has the coupling effect, which can improve the production efficiency of plastic processing and reduce the production cost and has good compatibility with polyolefin resins and so on.